4 Replacement Procedures
4.15.2 RTC battery
Removing the RTC battery
The following describes the procedure for removing the RTC battery. (See Figure 4-25.)
1. Pull out the RTC batter cable from the guide of penholder.
2. Remove the RTC battery from the slot of penholder.
Penholder
Installing the RTC battery
The following describes the procedure for installing the RTC battery. (See Figure 4-25.)
1. Install the RTC battery to the slot of penholder.
2. Arrange the RTC battery cable to the guide of penholder.
Satellite R10 Maintenance Manual (960-509)
Figure 4-25 Removing the RTC battery
4.15 Penholder / RTC battery
RTC battery
4-37