Figure 1-9 Keyboard - Toshiba Satellite R10 Maintenance Manual

Hide thumbs Also See for Satellite R10:

Table of Contents

4.7 Keyboard

Installing the keyboard

The following describes the procedure for installing the keyboard. (See Figure 4-9.)

1. Put the keyboard on the palm rest as its face is down. Connect the keyboard

flexible cable to CN3200 on the system board and lock the connector.

2. Hook the bottom edge of the keyboard to the palm rest. Place the keyboard on the

computer and secure it with the following screws.

3. Fit to install the keyboard holder .

FLAT BIND screw

Satellite R10 Maintenance Manual (960-509)

4 Replacement Procedures

Chapters

Table of Contents