Toshiba Satellite R10 Maintenance Manual page 81

2 Troubleshooting
Table 2-3 Debug port (Boot mode) error status (6/9)
D port status Inspection items
(06h)
Initialization of devices which
need initialization before PCI
bus initialization
PIC initialization
PIC test
Password Initialization
07h
PCI bus initialization
(connection of DS Bus)
Initialization of LAN
information
Check of WakeUp factor
08h
Task generation for waiting
INIT_PCI completion
CMOS data initialization (2)
PnP initialization
Setting of setup items
Waiting for the completion of
Multi-box status check
H/W setting based on
resource
09H
Task generation for waiting
PnP resource making
completion
Serial interruption control
PnP H/W initialization
PCI automatic configuration
Satellite R10 Maintenance Manual (960-509)
2.4 System Board Troubleshooting
Details
AC'97 control
Initialization of temperature control information
KBC initialization
VGA display off, Reset control
Sound initialization
PC multi-box status acquisition
HC initialization, USB device connection recognition
and initialization
Control of built-in LAN permission/prohibition
(before use of interruption) (for models supporting
YEBISU)
PC card slot initialization
SIO initialization (for models supporting SIO)
FIR initialization (for models supporting FIR)
Making of work for automatic configuration
Acquisition of PCI IRQ
2-27