4 Replacement Procedures
4.30 PC card slot
Removing the PC card slot
The following describes the procedure for removing the PC card slot (See Figure 4-48).
1. Remove the following screws securing the PC card slot.
• M2.0×3S
• M2.0×8S
2. Pull the PC card slot straight up and remove it from the system board.
M2.0x3S S-THIN HEAD
4-68
[CONFIDENTIAL]
S-THIN HEAD screw
BIND screw
Figure 4-48 Removing the PC card slot
×2
×2
M2.0x8S BIND
PC card slot
QOSMIO F30 Maintenance Manual (960-555)
4.30 PC card slot