Toshiba Satellite R10 Maintenance Manual page 228

3 Tests and Diagnostics
12. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
(b) Parallel Port Mode
Use this option to set information of Parallel Port Mode.
ECP
Std. Bi-Direct.
NOTE: When using Windows, the setting of "Toshiba HW setup" is enabled and the
setting of "Parallel Port Mode" is disabled.
(c) Hard Disk Mode
Use this option to select the hard disk mode.
Enhanced IDE (normal)
Standard IDE Select this mode when using an OS which does not support the
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the
setting, you will have to reformat the hard disk for the appropriate setting.
Satellite R10 Maintenance Manual (960-509)
Enables the touch pad. (Default)
Disables the touch pad.
Sets the port mode to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
Sets the bi-directional setting. This setting should be used with
some other parallel devices.
Select this mode when the HDD is used for MS-DOS? ,
Windows 95/98/2000/XP, or OS/2? .
Enhanced IDE. When this mode is selected, up to 528MB is
logically available and the rest of the capacity is not usable.
3.32 SETUP
(Default)
3-109