Toshiba Satellite R10 Maintenance Manual page 244

4 Replacement Procedures
Installing the battery pack
The following describes the procedure for installing the battery pack. (See Figure 4-1.)
Caution: There is a danger that the lithium ion battery pack may explode if not fitted,
operated, handled, or disposed correctly. Dispostickerways the used
batteries pack in accordance with the laws and ordinances of your local
authority. Use only the batteries appro ved by Toshiba.
Note: Check visually the battery terminals and clean off any dirt with a dry cloth.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices from the computer.
3. Inset the connector of the battery pack to the connector of the computer. Press the
battery pack until the battery is locked.
4. Slide the battery lock into the lock position.
Satellite R10 Maintenance Manual (960-509)
4.2 Battery pack
4-9