Toshiba Satellite R10 Maintenance Manual page 264

4 Replacement Procedures
Installing the MDC / modem cable
The following describes the procedure for installing an MDC / modem cable. (See Figure
4-16 and 4-17.)
1. Connect the modem cable to the connector CN3001 on the system board.
2. Secure the drain cable 2 to the stud of hinge assembly with the following screw.
M2.0x4.0Z
?
3. Arrange the modem cable inside the insulators and close the insulators.
4. Arrange the modem cable along the guide of mini PCI cover.
5. Secure the drain cable 1 to the stud of system board with the following screw.
M2.0x4.0Z
?
M2.0x4.0B
?
6. Connect the modem cable to the connector of MDC.
7. Install the MDC to the connector CN3000 on the system board and secure it with
the following screws .
M2.0x4.0Z
?
Satellite R10 Maintenance Manual (960-509)
BIND screw
BIND screw
or
LH STICK
BIND screw
4.11 MDC / modem cable
x1
x1
x1
x2
4-29