Touch Pad - Toshiba Satellite R10 Maintenance Manual

4 Replacement Procedures

4.24 Touch pad

Removing the touch pad
The following describes the procedure for removing the touch pad. (See Figure 4-36.)
1. Remove the following screws securing the touch pad.
M2.0x4.0B
?
2. Remove the touch pad holder and touch pad from the cover assembly.
3. Peel off the glass tape and disconnect the touch pad cable from the touch pad.
M2.0x4.0B S-THIN FLAT BIND
Touch pad holder
Installing the touch pad
The following describes the procedure for installing the touch pad (See Figure 4-5.).
1. Connect the touch pad cable to the touch pad and stick the glass tape .
Install the touch pad and touch pad holder to the cover assembly.
Secure the touch pad with the following screws.
M2.0x4.0B
?
Satellite R10 Maintenance Manual (960-509)
S-THIN FLAT BIND screw

Touch pad

Figure 4-36 Removing the touch pad
S-THIN FLAT BIND screw
4.24 Touch pad
x3
Glass tape
Touch pad cable
x3
4-51