Toshiba Satellite R10 Maintenance Manual page 298

4 Replacement Procedures
Removing the Digitizer
The following describes the procedure for removing the digitizer. (See Figure 4-42.)
1. Remove the following screws securing the digitizer.
M2.0x3.0Z
?
2. Slide out the digitizer toward the arrow pointing.
M2.0x3.0Z BIND
Installing the digitizer
The following describes the procedure for installing the digitizer. (See Figure 4-42.)
1. Slide the digitizer into the back pocket of LCD.
Caution: When replacing the digitizer, fit the digitizer into the back of LCD toward the
arrow pointing.
2. Secure the digitizer with the following screws .
M2.0x3.0Z
?
Satellite R10 Maintenance Manual (960-509)
BIND screw
Figure 4-42 Removing the digitizer
BIND screw
4.28 Digitizer
x3
M2.0x3.0Z BIND
Digitizer
x3
4-63