Suzuki GSX-R1000 Service Manual page 598

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
9A-9 Wiring Systems:
1. Steel clamp
: Set the clamp facing downward and bend it to outside.
2. Clamp
: Bind the wiring harness and battery negative lead wires at blue
taping point and face the clamp end outside and downward. Be
sure not to slacken the rear brake light switch lead wire.
3. Clamp
: Bind the wiring harness and starter motor lead wire at blue taping
point and cut off the excess tip of the clamp.
4. ECM cushion
5. FP relay
6. Turn signal/side-stand relay
7. Cooling fan relay
email: info@motomatrix.co.uk / www.motomatrix.co.uk
"A"
2
"D"
"C"
3
"B"
1
4
5
8
8. Clamp
: Put the coupler in the frame rib and face the clamp end inside.
"A": Be sure not to pinch the CKP sensor lead wire between engine
and water hose.
"B": Put the coupler between the rear turn signal and frame cover.
"C": Do not twist the wiring harness.
"D": Bring the part number sticker on the wiring harness upward.
Do not twist the wiring harness.
"E": Put the turn signal/side-stand relay lead wires inside the frame.
Upside
4
7
6
"E"
I947H1910909-03