Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
Front Suspension Adjustment
After installing the front fork, adjust the spring pre-load
and two kinds of damping force as follows:
WARNING
!
Adjust the left and right front forks to the
same setting.
Spring Pre-load Adjustment
Turn the spring pre-load adjuster (1) counterclockwise
fully. From that position (softest), turn it clockwise to the
specified position.
STD position
4 turns in from softest position
Damping Force Adjustment
Rebound damping force
Fully turn the rebound damping force adjuster (1)
clockwise. From that position (stiffest), turn it out to
standard setting position.
STD position
4 turns out from stiffest position
1
email: info@motomatrix.co.uk / www.motomatrix.co.uk
B947H12206003
1
I947H1220010-01
I947H1220011-01
Compression damping force
Fully turn the compression damping force adjuster (1)
clockwise. From that position (stiffest), turn it out to
standard setting position.
STD position
5 turns from stiffest position
Front Fork Disassembly and Assembly
Refer to "Front Fork Removal and Installation" (Page 2B-
2).
NOTE
The right and left front forks are installed
symmetrically and therefore the disassembly
procedure for one side is the same as that for
the other side.
Disassembly
1) Turn the spring pre-load adjuster (1) to the softest
position.
Front Suspension:
2B-4
1
I947H1220012-01
B947H12206004
1
I947H1220013-01