Suzuki GSX-R1000 Service Manual page 551

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
• Install the gearshift cam plate (5).
NOTE
Align the gearshift cam pin "B" with the
gearshift cam plate hole "C".
"B"
"C"
• Apply a small quantity of thread lock to the gearshift
cam plate bolt and tighten it to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER "1322" or
equivalent)
Tightening torque
Gearshift cam plate bolt (c): 13 N·m (1.3 kgf-m,
9.5 lbf-ft)
(c)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
5
I947H1520009-01
I947H1520010-01
Manual Transmission:
• Apply a small quantity of thread lock to the gearshift
shaft end screw and tighten it to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER "1322" or
equivalent)
Tightening torque
Gearshift shaft end screw (d): 8.5 N·m (0.85 kgf-
m, 6.0 lbf-ft)
• When installing the gearshift shaft return spring,
position the stopper "D" of gearshift arm between the
shaft return spring ends "E".
• Install the washer (6) and gearshift shaft assembly (7).
NOTE
Pinch the gearshift arm stopper (8) with
return spring ends "E".
6
7
5B-19
(d)
I947H1520011-01
"D"
"E"
I947H1520012-01
8
"E"
I947H1520013-01