Suzuki GSX-R1000 Service Manual page 197

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
Step
2 1) Turn the ignition switch ON.
2) Measure the voltage between the O/W wire and ground.
Special tool
(A): 09900–25008 (Multi circuit tester set)
Tester knob indication
Voltage ( )
EVAP system purge control valve voltage
Battery voltage
((+) terminal: O/W – (–) terminal: Ground)
Is the voltage OK?
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Action
(A)
V
I718H2110003-01
Engine General Information and Diagnosis:
Yes
• Dbr wire open or
shorted to ground, or
poor "61" connection
failure.
• If wire and
connection are OK,
intermittent trouble or
faulty ECM.
• Recheck each
terminal and wire
harness for open
circuit and poor
connection.
• Replace the ECM
with a known good
one, and inspect it
again. Refer to "ECM
Removal and
Installation" in
Section 1C
(Page 1C-1).
1A-129
No
Open or short circuit in
the O/W wire.