Suzuki GSX-R1000 Service Manual page 190

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1A-122 Engine General Information and Diagnosis:
Step
1 1) Turn the ignition switch OFF.
2) Remove the air cleaner box. Refer to "Air Cleaner Box
Removal and Installation" in Section 1D (Page 1D-7).
3) Check the PAIR control solenoid valve coupler (1) for
loose or poor contacts.
If OK, then measure the PAIR control solenoid valve
resistance.
4) Remove the PAIR control solenoid valve. Refer to "PAIR
Control Solenoid Valve Removal and Installation" in
Section 1B (Page 1B-9).
5) Measure the resistance between terminals.
Special tool
(A): 09900–25008 (Multi circuit tester set)
Tester knob indication
Resistance (Ω)
PAIR control solenoid valve resistance
20 – 24 Ω at 20 – 30 °C (68 – 86 °F)
(Terminal – Terminal)
Is the resistance OK?
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Action
1
I947H1110143-01
(A)
I947H1110105-01
Yes
Go to Step 2. Replace the PAIR
control solenoid valve
with a new one. Refer to
"PAIR Control Solenoid
Valve Removal and
Installation" in Section
1B (Page 1B-9).
No