Suzuki GSX-R1000 Service Manual page 277

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
• Tighten the thermostat cover bolts (6) to the specified
torque.
Tightening torque
Thermostat cover bolt (e): 10 N·m (1.0 kgf-m, 7.0
lbf-ft)
"B"
5
• Tighten the ECT sensor (7) to the specified torque.
Tightening torque
ECT sensor (f): 18 N·m (1.8 kgf-m, 13.0 lbf-ft)
CAUTION
!
• Take special care when handling the
temperature sensor. It may cause damage
if it gets a sharp impact.
• Replace a gasket with a new one.
7
• Install the valve spring seat (8).
• Apply molybdenum oil to the oil seal (9), and press-fit
it into the position.
CAUTION
!
Do not reuse the removed oil seal.
M/O: Molybdenum oil (MOLYBDENUM OIL
SOLUTION)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
6
(e)
I947H1140085-01
(f)
I947H1140086-01
• Insert the valve, with its stem coated with
molybdenum oil solution all around and along the full
stem length without any break.
CAUTION
!
When inserting the valve, take care not to
damage the lip of the oil seal.
M/O: Molybdenum oil (MOLYBDENUM OIL
SOLUTION)
• Install each valve spring with the small-pitch portion
"C" facing cylinder head.
"E"
"D"
"C"
"C": Small-pitch portion
"D": Large-pitch portion
Engine Mechanical: 1D-43
9
8
I947H1140087-01
I705H1140165-01
"F"
I947H1140088-01
"E": Upward
"F": Paint