Brake Caliper Sliding Pin; Boot; Rear Brake Disc Removal And Installation; Rear Brake Caliper Parts Inspection - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
4C-6 Rear Brakes:
• Install the rear brake caliper. Refer to "Rear Brake
Caliper Removal and Installation" (Page 4C-3).

Rear Brake Caliper Parts Inspection

Refer to "Rear Brake Caliper Disassembly and
Assembly" (Page 4C-4).
Brake Caliper Cylinder
Inspect the brake caliper cylinder wall for nicks,
scratches or other damage. If any damage is found,
replace the caliper with a new one.
Brake Caliper Piston
Inspect the brake caliper piston surface for any
scratches or other damage. If any damage is found,
replace the piston with a new one.

Brake Caliper Sliding Pin

Inspect the brake caliper sliding pins for wear and other
damage. If any damage is found, replace the sliding pin
with a new one.
email: info@motomatrix.co.uk / www.motomatrix.co.uk

Boot

Inspect the boots for damage and wear. If any defects
are found, replace it with a new one.
B947H14306006
Brake Pad Spring
Inspect the brake pad spring for damage and excessive
bend. If any defects are found, replace it with a new one.
I947H1430019-01

Rear Brake Disc Removal and Installation

Removal
1) Remove the rear wheel assembly. Refer to "Rear
Wheel Assembly Removal and Installation" in
Section 2D (Page 2D-11).
2) Remove the rear brake disc.
I947H1430020-01
I947H1430021-01
I947H1430022-01
I947H1430023-01
B947H14306007
I947H1430024-01