Suzuki GSX-R1000 Service Manual page 188

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1A-120 Engine General Information and Diagnosis:
Step
6 1) Turn the ignition switch OFF.
2) Disconnect the EXCVA coupler (1).
3) Apply 12 V to the terminals and check the operation of
EXCVA.
4) Then, switch the wires supplied 12 V and check the
operation of EXCVA. (Check the operation of EXCVA in
both way.)
Is the operation OK?
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Action
1
I947H1110101-01
I947H1110102-01
I947H1110103-01
Yes
• Loose or poor • Replace the EXCVA
contacts on the
EXCVA or ECM
• Inspect that the
coupler (terminal "13"
or "1").
• Open or short circuit
in the B/R wire or R/B
wire.
• If wire and
connection are OK,
intermittent trouble or
faulty ECM.
• Recheck each
terminal and wire
harness for open
circuit and poor
connection.
• Replace the ECM
with a known good
one, and inspect it
again.
No
with a new one.
EXCV and two cables
move smoothly.