Bearing And Oil Seal - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
5B-4 Manual Transmission:
4) Using suitable size bolts (3), remove the driveshaft
left bearing case (4).
5) Remove the dowel pin.
3
4
6) Remove the driveshaft right bearing case bolts.
7) Using suitable size bolts (5), remove the driveshaft
right bearing assembly (6).
8) Remove the driveshaft assembly (7).
7
email: info@motomatrix.co.uk / www.motomatrix.co.uk
I947H1520028-01
6
5
I947H1520029-01
I947H1520030-01

Bearing and Oil Seal

NOTE
If there is no abnormal condition, the oil seal
and bearing removal is not necessary.
CAUTION
!
The removed oil seal and bearing must be
replaced with a new one.
1) Remove the gearshift cam bearing (1) with the
special tools.
CAUTION
!
Be careful not to lean the bearing remover.
Special tool
(A): 09923–74511 (Bearing remover)
(B): 09930–30104 (Rotor remover sliding
shaft)
1
(A)
2) Remove the gearshift shaft oil seal (2). (LH only)
(B)
I947H1520031-02
2
I947H1520032-01