Using Your Car Kit
User Interface Module (UIM) Control Buttons
The UIM enables you to set up and use the Bluetooth® Hands Free Car Kit.
ANSWER
END
The buttons on the UIM are lit at different times to indicate when they may be
pressed.
Note: See "UIM LED Indicator Functions" on page 31 for information on when and
why the buttons light or flash.
The TALK Button
The blue TALK button has 2 functions, depending on whether you press and
release it quickly or press and hold it.
Press and Release
Press and release the TALK button to initiate a Voice Recognition (VR) session.
When you begin a VR session, you hear a prompt and then a short beep. The
beep—also known as a listening prompt—indicates that the system is waiting for a
verbal command from you.
Press and Hold
Press and hold the TALK button to initiate the pairing process.
The ANSWER Button
The green ANSWER button has 6 functions, depending on the state of the system.
These functions can be initiated by pressing and releasing or pressing and holding
the button.
10
TALK
Volume
UP/DOWN