Figure 3-3 System Information - Samsung iES4028F Management Manual

Web – Click System, System Information. Specify the system name, location, and
contact information for the system administrator, then click Apply. (This page also
includes a Telnet button that allows access to the Command Line Interface via Telnet.)
CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5
Console(config)#snmp-server location WC 9
Console(config)#snmp-server contact Ted
Console(config)#exit
Console#show system
System Description: L2 Gigabit Ethernet PoE Standalone Switch
System OID String: 1.3.6.1.4.1.236.4.1.12.1.103
System Information
System Up Time:
System Name:
System Location:
System Contact:
MAC Address (Unit1):
Web Server:
Web Server Port:
Web Secure Server:
Web Secure Server Port:
Telnet Server:
Telnet Server Port:
Jumbo Frame:
POST result
Timer Test ................... PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Switch Int Loopback Test ..... PASS
Done All Pass.
Console#
* The iES4028F, iES4028FP, iES4024GP MIB Object Identifiers are 1.3.6.1.4.1.236.4.1.12.1.102,
1.3.6.1.4.1.236.4.1.12.1.101, and 1.3.6.1.4.1.236.4.1.12.1.103 respectively.

Figure 3-3 System Information

0 days, 2 hours, 26 minutes, and 30.55 seconds
R&D 5
WC 9
Ted
00-16-B6-F0-71-3C
Enabled
80
Enabled
443
Enable
23
Disabled
Basic Configuration
*
3
4-17
4-89
4-88
4-31
3-13