Mac-Authentication Max-Mac-Count; Clear Network-Access - Samsung iES4028F Management Manual

4
Command Line Interface

mac-authentication max-mac-count

Use this command to set the maximum number of MAC addresses that can be
authenticated on a port via 802.1X authentication or MAC authentication. Use the
no form of this command to restore the default.
Syntax
mac-authentication max-mac-count count
no mac-authentication max-mac-count
count - The maximum number of 802.1X and MAC-authenticated MAC
addresses allowed. (Range: 1-1024)
Default Setting
1024
Command Mode
Interface Config
Example
Console(config-if)#mac-authentication max-mac-count 32
Console(config-if)#

clear network-access

Use this command to clear entries from the secure MAC addresses table.
Syntax
clear network-access mac-address-table [static | dynamic]
[address mac-address] [interface interface]
• static - Specifies static address entries.
• dynamic - Specifies dynamic address entries.
• mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-xx-xx-xx)
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number.
(Range: 1-28 on iES4028F/iES4028FP, 1-24 on iES4024GP)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#clear network-access mac-address-table interface ethernet 1/1
Console#
4-156