Debug Radius - Samsung iES4028F Management Manual

4
Command Line Interface
When the debug state-machine option is selected, messages similar to those shown
below are displayed when a change occurs in the state-machine.
01:02:03: DOT1X: event/pae-sm: State changing on port=1/1 from initialize
to disconnected
01:02:03: DOT1X: event/pae-sm: State changing on port=1/1 from disconnected
to connecting
01:02:03: DOT1X: event/pae-sm: State changing on port=1/1 from connecting
to timeout
01:02:03: DOT1X: event/pae-sm: State changing on port=1/1 from connecting
to authenticating
01:02:03: DOT1X: event/pae-sm: State changing on port=1/1 from timeout to
authenticated
01:02:03: DOT1X: event/pae-sm: State changing on port=1/1 from
authenticating to held
01:02:03: DOT1X: event/pae-sm: State changing on port=1/1 from
authenticating to aborting
01:02:03: DOT1X: event/bend-sm: State changing on port=1/1 from request to
response
01:02:03: DOT1X: event/bend-sm: State changing on port=1/1 from request to
timeout
01:02:03: DOT1X: event/bend-sm: State changing on port=1/1 from response to
fail
01:02:03: DOT1X: event/bend-sm: State changing on port=1/1 from response to
success
01:02:03: DOT1X: event/bend-sm: State changing on port=1/1 from success to
idle

debug radius

This command configures debug settings for RADIUS processes. Use the no form
to disable debug mode for RADIUS.
Syntax
[no] debug radius
[all | config | database | event | packet | avpair]
[show {all | accounting | authentication | authorization}]
• all - Sets debugging for all options (config, database, event, packet, avpair).
• config - Sets debugging for RADIUS configuration settings.
• database - Sets debugging for RADIUS database operations.
• event - Sets debugging for RADIUS events.
• packet - Sets debugging for RADIUS packets.
• avpair - Sets debugging for more detailed information on RADIUS packets.
• show - Displays information about the specified debug type.
- all - Displays information for all options.
- accounting - Displays information on accounting processes.
- authentication - Displays information on authentication processes.
- authorization - Displays information on authorization processes.
Default Setting
Disabled
4-82