3
Configuring the Switch
Enabling IP DSCP Priority
The switch allows you to enable or disable the IP DSCP priority.
Command Attributes
• IP DSCP Priority Status – The following options are:
- Disabled – Disables the priority service. (Default Setting: Disabled)
- IP DSCP – Maps layer 3/4 priorities using Differentiated Services Code Point
Mapping.
Web – Click Priority, IP DSCP Priority Status. Select IP DSCP from the drop down
menu, then click Apply.
CLI – The following example globally enables DSCP Priority service on the switch.
Console(config)#map ip dscp
Console(config)#end
Console#show map ip dscp
dscp Mapping Status: Enabled
DSCP COS
---- ---
0
1
1
0
2
0
3
0
. .
.
3-236
Figure 3-135 IP DSCP Priority Status
4-313
4-315