Switch Cluster Commands; Cluster; Table 4-21 Switch Cluster Commands - Samsung iES4028F Management Manual

Table of Contents

Advertisement

Switch Cluster Commands

Switch Clustering is a method of grouping switches together to enable centralized
management through a single unit. Switches that support clustering can be grouped
together regardless of physical location or switch type, as long as they are
connected to the same local network.
Command

cluster

cluster commander
cluster ip-pool
cluster member
rcommand
show cluster
show cluster members
show cluster candidates Displays current cluster Candidates in the network
Using Switch Clustering
• A switch cluster has a primary unit called the "Commander" which is used to
manage all other "Member" switches in the cluster. The management station uses
both Telnet and the web interface to communicate directly with the Commander
through its IP address, while the Commander manages Member switches using
the cluster's "internal" IP addresses.
• Once a switch has been configured to be a cluster Commander, it automatically
discovers other cluster-enabled switches in the network. These "Candidate"
switches only become cluster Members when manually selected by the
administrator through the management station.
Note:
Cluster Member switches can be managed either through a Telnet connection to
the Commander, or through a web management connection to the Commander.
When using a console connection, from the Commander CLI prompt, use the
rcommand (see page 4-76) to connect to the Member switch.
cluster
This command enables clustering on the switch. Use the no form to disable
clustering.
Syntax
[no] cluster
Default Setting
Enabled
Command Mode
Global Configuration

Table 4-21 Switch Cluster Commands

Function
Configures clustering on the switch
Configures the switch as a cluster Commander
Sets the cluster IP address pool for Members
Sets Candidate switches as cluster members
Provides configuration access to Member switches
Displays the switch clustering status
Displays current cluster Members
System Management Commands
4
Mode
Page
GC
4-73
GC
4-74
GC
4-75
GC
4-75
GC
4-76
PE
4-76
PE
4-77
PE
4-77
4-73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ies4028fpIes4024gp

Table of Contents