Banner Configure Company - Samsung iES4028F Management Manual

Command Usage
The administrator can batch-input all details for the switch with one command.
When the administrator finishes typing the company name and presses the
enter key, the script prompts for the next piece of information, and so on, until
all information has been entered. Pressing enter without inputting information
at any prompt during the script's operation will leave the field empty. Spaces
can be used during script mode because pressing the enter key signifies the
end of data input. The delete and left-arrow keys terminate the script. Use of
the backspace key during script mode is not supported. If, for example, a
mistake is made in the company name, it can be corrected with the banner
configure company command.
Example
Console(config)#banner configure
Company: Samsung Corporation
Responsible department: R&D Dept
Name and telephone to Contact the management people
Manager1 name: Sr. Network Admin
phone number: 123-555-1212
Manager2 name: Wile E. Coyote
phone number: 123-555-1213
Manager3 name: Night-shift Net Admin / Janitor
phone number: 123-555-1214
The physical location of the equipment.
City and street address: 12 Straight St. Motown, Zimbabwe
Information about this equipment:
Manufacturer: Samsung Networks
ID: 123_unique_id_number
Floor: 2
Row: 7
Rack: 29
Shelf in this rack: 8
Information about DC power supply.
Floor: 2
Row: 7
Rack: 25
Electrical circuit: : ec-177743209-xb
Number of LP:12
Position of the equipment in the MUX:1/23
IP LAN:192.168.1.1
Note: This is a random note about this managed switch and can contain
miscellaneous information.
Console(config)#

banner configure company

This command is used to configure company information displayed in the banner.
Use the no form to restore the default setting.
Syntax
banner configure company name
no banner configure company
name - The name of the company. (Maximum length: 32 characters)
System Management Commands
4
4-19