Binding A Port To An Access Control List; Figure 3-69 Configuring Acl Port Binding - Samsung iES4028F Management Manual

Binding a Port to an Access Control List

After configuring the Access Control Lists (ACL), you can bind the ports that need to
filter traffic to the appropriate ACLs. You can assign one IP access list to any port.
Command Usage
• Each ACL can have up to 32 rules.
• This switch supports ACLs for ingress filtering only.
Command Attributes
• Port – Fixed port or SFP module.
(Range: 1-28 on iES4028F/iES4028FP, 1-24 on iES4024GP)
• IP – Specifies the IP ACL to bind to a port.
• MAC – Specifies the MAC ACL to bind to a port.
• IN – ACL for ingress packets.
Web – Click Security, ACL, Port Binding. Mark the Enable field for the port you want
to bind to an ACL for ingress or egress traffic, select the required ACL from the
drop-down list, then click Apply.
CLI – This example assigns an IP access list to port 1, and an IP access list to
port 3.
Console(config)#interface ethernet 1/1
Console(config-if)#ip access-group david in
Console(config-if)#exit
Console(config)#interface ethernet 1/3
Console(config-if)#ip access-group david in
Console(config-if)#

Figure 3-69 Configuring ACL Port Binding

General Security Measures
3
4-188
4-181
3-115