Show Ip Igmp Snooping; Show Mac-Address-Table Multicast - Samsung iES4028F Management Manual

4
Command Line Interface

show ip igmp snooping

This command shows the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See "Configuring IGMP Snooping and Query Parameters" on page 3-253 for a
description of the displayed items.
Example
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
Service status:
Querier status:
Leave proxy status:
Query count:
Query interval:
Query max response time: 20 sec
Router port expire time: 300 sec
Immediate Leave Processing: Disabled on all VLAN
IGMP snooping version:
Console#

show mac-address-table multicast

This command shows known multicast addresses.
Syntax
show mac-address-table multicast [vlan vlan-id] [user | igmp-snooping]
• vlan-id - VLAN ID (1 to 4094)
• user - Display only the user-configured multicast entries.
• igmp-snooping - Display only entries learned through IGMP snooping.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on selected
options.
4-328
Enabled
Enabled
Disabled
10
100 sec
Version 2