Spanning Tree Commands; Table 4-64 Spanning Tree Commands - Samsung iES4028F Management Manual

4
Command Line Interface

Spanning Tree Commands

This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Command
spanning-tree
spanning-tree mode
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree
system-bpdu-flooding
spanning-tree
path-cost method
spanning-tree
transmission-limit
spanning-tree
mst-configuration
mst vlan
mst priority
name
revision
max-hops
spanning-tree
spanning-disabled
spanning-tree cost
spanning-tree port-priority
spanning-tree edge-port
spanning-tree portfast
spanning-tree
port-bpdu-flooding
spanning-tree link-type
spanning-tree
loopback-detection
spanning-tree
loopback-detection
release-mode
spanning-tree
loopback-detection trap
4-226

Table 4-64 Spanning Tree Commands

Function
Enables the spanning tree protocol
Configures STP, RSTP or MSTP mode
Configures the spanning tree bridge forward time
Configures the spanning tree bridge hello time
Configures the spanning tree bridge maximum age
Configures the spanning tree bridge priority
Floods BPDUs to all other ports or just to all other ports in
the same VLAN when global spanning tree is disabled
Configures the path cost method for RSTP/MSTP
Configures the transmission limit for RSTP/MSTP
Changes to MSTP configuration mode
Adds VLANs to a spanning tree instance
Configures the priority of a spanning tree instance
Configures the name for the multiple spanning tree
Configures the revision number for the multiple spanning
tree
Configures the maximum number of hops allowed in the
region before a BPDU is discarded
Disables spanning tree for an interface
Configures the spanning tree path cost of an interface
Configures the spanning tree priority of an interface
Enables fast forwarding for edge ports
Sets an interface to fast forwarding
Floods BPDUs to other ports when global spanning tree is
disabled
Configures the link type for RSTP/MSTP
Enables BPDU loopback detection for the port
Configures loopback release mode for the port
Enables BPDU loopback SNMP trap notification for the
port
Mode Page
GC 4-227
GC 4-228
GC 4-229
GC 4-229
GC 4-230
GC 4-231
GC 4-231
GC 4-232
GC 4-232
GC 4-233
MST 4-233
MST 4-234
MST 4-235
MST 4-235
MST 4-236
IC 4-236
IC 4-237
IC 4-238
IC 4-239
IC 4-240
IC 4-240
IC 4-241
IC 4-242
IC 4-242
IC 4-243