Sntp Client - Samsung iES4028F Management Manual

4
Command Line Interface
Command
clock summertime
(recurring)
calendar set
show calendar

sntp client

This command enables SNTP client requests for time synchronization from NTP or
SNTP time servers specified with the sntp servers command. Use the no form to
disable SNTP client requests.
Syntax
[no] sntp client
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the switch only records the time starting
from the factory default set at the last bootup (i.e., 00:00:00, Jan. 1, 2001).
• This command enables client time requests to time servers specified via the
sntp servers command. It issues time synchronization requests based on the
interval set via the sntp poll command.
• SNTP and NTP clients cannot both be enabled at the same time.
Example
Console(config)#sntp server 10.1.0.19
Console(config)#sntp poll 60
Console(config)#sntp client
Console(config)#end
Console#show sntp
Current time:
Poll interval: 60
Current mode: unicast
SNTP status: Enabled
SNTP server: 10.1.0.19 0.0.0.0 0.0.0.0
Current server: 10.1.0.19
Console#
Related Commands
sntp server (4-61)
sntp poll (4-61)
show sntp (4-62)
4-60
Table 4-19 Time Commands
Function
Configures summer time (daylight savings time) for the switch's
internal clock
Sets the system date and time
Displays the current date and time setting
Dec 23 02:52:44 2002
(Continued)
Mode Page
GC 4-70
PE 4-72
NE, PE 4-72