Filtering Ip Addresses For Management Access; Figure 3-54 Displaying 802.1X Port Statistics - Samsung iES4028F Management Manual

3
Configuring the Switch
Web – Select Security, 802.1X, Statistics. Select the required port and then click
Query. Click Refresh to update the statistics.
CLI – This example displays the 802.1X statistics for port 4.
Console#show dot1x statistics interface ethernet 1/4
Eth 1/4
Rx: EAPOL
Start
2
Last Last
EAPOLVer EAPOLSrc
1 00-12-CF-94-34-DE
Tx: EAPOL
Total Req/Id
2017 1005
Console#

Filtering IP Addresses for Management Access

You can create a list of up to 16 IP addresses or IP address groups that are allowed
management access to the switch through the web interface, SNMP, or Telnet.
Command Usage
• The management interfaces are open to all IP addresses by default. Once you add
an entry to a filter list, access to that interface is restricted to the specified
addresses.
• If anyone tries to access a management interface on the switch from an invalid
address, the switch will reject the connection, enter an event message in the
system log, and send a trap message to the trap manager.
3-94

Figure 3-54 Displaying 802.1X Port Statistics

EAPOL EAPOL
Logoff Invalid
0 0
EAP EAP
Req/Oth
0
EAPOL EAP
Total Resp/Id
1007 672
4-143
EAP EAP
Resp/Oth LenError
0 0