Show Reload; Prompt - Samsung iES4028F Management Manual

4
Command Line Interface
Command Usage
This command resets the entire system. The switch will wait the designated
amount of time before resetting. If a delayed reset has already been
scheduled, then the newly configured reset will overwrite the original delay
configuration. The configured delay time cannot exceed 24 days (576 hours,
or 34560 minutes). If no time is specified, then the switch will reboot
immediately.
Example
This example shows how to reset the switch:
Console#reload
System will be restarted, continue <y/n>? y

show reload

This command displays the remaining time until a pending delayed reset will take
place.
Syntax
show reload
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows how to display the remaining time until a configured delayed
reset of the switch will take place:
Console#show reload
The switch will be rebooted at Nov 23 22:52:14 2007.
Remaining Time : 0 days, 4 hours, 31 minutes, 46 seconds.
Console#

prompt

This command customizes the CLI prompt. Use the no form to restore the default
prompt.
Syntax
prompt string
no prompt
string - Any alphanumeric string to use for the CLI prompt. (Maximum
length: 255 characters)
Default Setting
Console
4-14