Adjusting The Exposure (Density) - Canon FAX-L380 Quick Reference Manual

Set the resolution as follows:
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Image Quality].
The LCD display shows the current resolution setting.
3
Press [Image Quality] repeatedly until the resolution you want is displayed
FAX RESOLUTION
4
Continue with the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode after about 5 seconds.

Adjusting the Exposure (Density)

You can adjust the lightness/darkness of the document pages before you scan for sending.
You can select the scanning density from the following:
• <LIGHT> for documents with dark text or color.
• <STANDARD> for normal printed or type written text.
• <DARK> for documents with light text or color.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Exposure].
The LCD displays the current exposure setting.
3
Press [Exposure] repeatedly until the scanning density you want is displayed
DENSITY CONTROL
4
Continue with the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode after about 5 seconds.
31/12/2003 WED 10:00
STANDARD FaxOnly
31/12/2003 WED 10:00
STANDARD FaxOnly
press [OK].
STANDARD
press [OK].
STANDARD
Preparing to Send a Fax
7
7-2