Table of Contents
Advertisement
Current
QA Bank
Table 10-3
The Soft Buttons in MIDI Mode
The Þrst three soft buttons select the three MIDI-mode pages. The PrgChg soft button lets you
send a program change command on any MIDI channel. The RsetCh soft button lets you return
all channel parameters to their default values. The Panic soft button sends an All Notes Off and
an All Controllers Off messages to the K2600 and on all 16 MIDI channels.
Program Change (PrgChg)
When you press this soft button, a dialog appears:
||||||||||||||||||||||||||||||||||||||||
Send|Program|Change:||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
On|Channel||2,|Send|Program|||0|||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Chan-||Chan+||Prog-||Prog+||Send||Cancel
This dialog lets you send program changes out the MIDI Out port, but does not change internal
programs.
The Chan/Bank buttons, the Up/Down cursor buttons, and the ChanÐ and Chan+ soft buttons
can all be used to change the channel on which the program change command will be sent. The
Left/Right cursor buttons, the Plus/Minus buttons, the Alpha Wheel and the ProgÐ and Prog+
soft buttons can all be used to change the program change number that will be sent. When
Entry From
Alphanumeric Pad
1
0
1
9
2
0
2
9
9
9
10
0
19
9
20
0
29
9
75
9
100
0
105
9
110
9
117
7
119
9
QA Kurz Program Change Examples
Commands Sent
100
10
100
19
100
20
100
29
100
99
101
0
101
99
102
0
102
99
107
59
100
0
100
59
101
99
101
77
101
99
MIDI Mode
The Soft Buttons in MIDI Mode
10-17
Advertisement
Table of Contents
