Configuring For Netbeui Using Epsonnet Winassist - Epson aculaser c2000 Administrator's Manual

Configuring for NetBEUI using EpsonNet WinAssist

You can use the Internal Print Server with the default value for
NetBEUI. If you want to change the default value, use EpsonNet
WinAssist or WebAssist. The default values for NetBEUI are as
follows;
Items
NetBIOS name
Workgroup name
Device name
To configure the Internal Print Server for NetBEUI, follow the
steps below.
Note:
❏ TCP/IP or IPX must be installed on your computer.
❏ To configure for NetBEUI with EpsonNet WinAssist, the Internal
Print Server must have a valid IP address or you must have logged
in to the NetWare server or NDS context as an ADMIN.
1. Turn on the printer.
2. Run EpsonNet WinAssist from the Start menu.
4-4
Settings for Windows 98/95
Default values
EPxxxxxx
Workgroup
EPSON