Installing Epsonnet Webmanager - Epson aculaser c2000 Administrator's Manual

Installing EpsonNet WebManager

Follow the steps below to install EpsonNet WebManager.
1. Be sure that TCP/IP is installed, and the IP address or host
name is set for the computer. (Register the host name in the
hosts file in the Windows directory.)
2. Insert the software CD-ROM in the CD-ROM drive.
3. The EPSON Installation Program screen opens automatically.
If the EPSON Installation Program screen does not appear
automatically, click Start and Run (Windows
98/95/2000/NT 4.0); or choose Run from the File menu in the
Program Manager (Windows NT 3.51). Then, enter
D:\EPSETUP.EXE and click OK (substitute the appropriate
drive letter if necessary).
4. Double-click Install EpsonNet WebManager; or you can
also install by selecting Install EpsonNet WebManager and
then clicking the arrow at the top right.
5. Follow the on-screen instructions to complete the installation.
Note:
You do not need to install EpsonNet WebManager in the client
computer. Just announce the IP address or host name of the server to
any clients who use EpsonNet WebManager from a client computer.
EpsonNet WebManager
14
14-9