Configuring For Netbeui Using Epsonnet Webassist - Epson aculaser c2000 Administrator's Manual

6. Type your password (up to 20 characters) and click OK to save
settings. If you need to set a password, see "About
passwords" on page 9-9.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
Internal Print Server, you must wait until after the message
appears to turn off your printer.
Configuring for NetBEUI using EpsonNet
WebAssist
To configure the Internal Print Server using EpsonNet WebAssist,
follow the steps below.
Note:
❏ A web browser must be installed in your computer.
❏ TCP/IP must be correctly set for the computer and Internal Print
Server.
❏ Do not operate EpsonNet WinAssist and EpsonNet WebAssist at
the same time.
❏ There are some restrictions on the characters you can use depending
on your browser. For details, see your browser and OS
documentation.
1. Turn on the printer.
2. Open EpsonNet WebAssist by either of the following
methods:
Settings for Windows 2000/NT
5
5-19