Using The Net Use Command To Set Up The Printer - Epson aculaser c2000 Administrator's Manual

Windows NT 4.0
1. Click Start, point to Settings, and then click Printers.
2. Double-click Add Printer.
3. Click the Network printer server radio button in the Add
Printer Wizard dialog box. The Connect to Printer dialog box
appears.
4. Select the printer you want to configure from the Shared
Printers list.If you cannot select the printer, type the following
in the Printer box:
\\(NetBIOS name of the Internal Print Server) \
(Device name of the Internal Print Server)
5. Follow the on-screen instructions to set up the printer.
Windows NT 3.51
1. Double-click Print Manager from the Main dialog box, and
select Connect to Printer from the Printer menu.
2. Select the target printer from the Shared Printers list and click
OK. If you cannot select the printer, type directly in the Printer
box as follows.
\\ (NetBIOS name of the Internal Print Server)\ (Device
name of the Internal Print Server)
3. Follow the on-screen instructions to set up the printer.

Using the NET USE command to set up the printer

If you are using Windows NT server and using NetBIOS to
connect with the Internal Print Server, we recommend that you
use the NET USE command, as outlined below.
5-22
Settings for Windows 2000/NT