Printing Via Lpr Software In Windows Nt 3.51 - Epson aculaser c2000 Administrator's Manual

Printing via LPR software in Windows NT 3.51

Installing LPR software in Windows NT 3.51
Follow the steps below to install LPR software in Windows NT
3.51. If you have already installed Microsoft TCP/IP Printing, you
can skip these steps.
1. Double-click the Network icon in the Control Panel to open
the Network Settings dialog box.
2. If Microsoft TCP/IP Printing is in the Installed Software list
box, you can skip to the next section. Otherwise, click Add
Software.
3. Select TCP/IP Protocol and related components and click
Continue.
4. Select TCP/IP Network Printing Support. Then click
Continue.
5. Follow the instructions on the screen.
For more information, see your Windows NT 3.51
documentation.
Setting up the printer in Windows NT 3.51
After configuring the Internal Print Server, you need to set up the
network printer. Follow these steps to set up the printer in
Windows NT 3.51.
Note:
Install the correct printer driver before starting these steps.
1. Click Print Manager in the Main program group.
5-8
Settings for Windows 2000/NT