Installing Epsonnet Winassist/Macassist; Windows - Epson aculaser c2000 Administrator's Manual

Installing EpsonNet WinAssist/MacAssist

Install the configuration utility software, EpsonNet WinAssist or
EpsonNet MacAssist to configure the Internal Print Server for
your network.
Note:
Before installing EpsonNet WinAssist, be sure to install any necessary
protocols and services such as TCP/IP or NetBEUI. EpsonNet
WinAssist may not open if you add or delete the protocols after installing
EpsonNet WinAssist. If this happens, uninstall EpsonNet WinAssist
and then reinstall it. See "Uninstalling EpsonNet WinAssist" on page
1-6 for instructions.

Windows

1. Insert the software CD-ROM in the CD-ROM drive.
2. The EPSON Installation Program screen opens automatically.
If the EPSON Installation Program screen does not appear
automatically, click Start and Run (Windows
98/95/2000/NT 4.0); or choose Run from the File menu in the
Program Manager (Windows NT 3.51). Then, enter
D:\EPSETUP.EXE and click OK (substitute the appropriate
drive letter if necessary).
3. Double-click Install EpsonNet WinAssist; or select Install
EpsonNet WinAssist and then click the arrow at the top right.
4. Follow the on-screen instructions to complete installation.
5. To start EpsonNet WinAssist, click Start, point to Programs
and EpsonNet WinAssist, then click EpsonNet WinAssist
(Windows 98/95/2000/NT 4.0); or double-click the
EpsonNet WinAssist icon in the EpsonNet WinAssist window
(NT 3.51).
1-4
Installing Software