Introduction to UNIX Settings
This chapter explains how to set up the printer for different UNIX
systems using the lpr or lp command (depending on the system).
The Internal Print Server supports many standard UNIX
commands and can be configured from a host computer.
The Internal Print Server is able to function as a remote printer on
systems using TCP/IP Ethernet transfer with lpr remote printing
protocol, or standard ftp (file transfer protocol).
Note:
Because this Internal Print Server does not convert data into the printer
control language, a printer driver and filter are necessary for each
system.
Setting Up Different UNIX Systems Using the lpr
Command
The following UNIX systems can print using the standard lpr
command.
SunSoft Solaris 2.4 or higher
SunOS 4.1.4 or higher
IBM AIX 3.2.5 or higher
HP-UX 9.05 or higher
SCO UNIX 4.2 or higher
8-2
Settings for UNIX