Device Information - Epson aculaser c2000 Administrator's Manual

Device information

Items
Panel canvas
Signal
LEDs
Remote Control
Panel (OnLine,
FormFeed, Continue,
Reset, and
WarmingUp buttons)
Printer image
Error information box
Printer Model Name
IP Host Name
IP Address
MAC Address
Memory
HDD
Date
Time
Local Time
Difference
Explanations
Displays the same information that is displayed
on the printer's control panel.
A signal shows the status level. The green light
is on when the printer is idle or printing. The
yellow light is on when the toner or oil roll is low.
The red light is on when the printer is out of
paper or toner, if paper is jammed, the cover
is open, or an error has occurred.
The LEDs indicates the current operating
printer status when you first turn on the printer,
during normal operation, and when errors
occur.
You can control the printer with this Remote
Control Panel functions. You can get the same
result when you click these buttons as pressing
the buttons on your printer.
Displays the printer image.
Displays error/warning information for the
printer.
The model name of the printer.
The IP host name of the printer.
The IP address of the printer.
The MAC address of the printer.
The installed memory size of the printer.
Capacity of the hard disk installed in the
printer.
Displays the date which you set in the Clock
Menu.
Displays the time which you set in the Clock
Menu.
Displays the time difference which you set in
the Clock Menu.
EpsonNet WinAssist/MacAssist/WebAssist
9
9-25