Configuring For Netware Using Epsonnet Winassist - Epson aculaser c2000 Administrator's Manual

For Remote (rpinter on IPX), go to the next section "Configuring
for NetWare using EpsonNet WinAssist" on page 3-38.
For Remote (LPR on IP), go to "Setting the IP Address Using
EpsonNet WinAssist/MacAssist" on page 2-8.
For Queue Based, go to "Using Bindery Print Server (NetWare
3.1x/4.1x)" on page 3-6 or "Using NDS Print Server (NetWare
4.1x/5)" on page 3-11.
Configuring for NetWare using EpsonNet
WinAssist
Follow the steps below if the printer is a Remote (rprinter on IPX)
connection.
Note:
Be sure that the one of the following Client is installed in your computer;
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on the printer.
2. From any NetWare client, log in to the target NetWare server
as ADMIN.
3. Run EpsonNet WinAssist from the Start menu.
3-38
Settings for NetWare