Making The Printer Environment With Bindery Mode - Epson aculaser c2000 Administrator's Manual

12. Specify a priority level between 1 to 10. One is top priority.
13. Press Esc to exit PCONSOLE.
Now go to the section "Configuring for NetWare using EpsonNet
WinAssist" on page 3-29.
Making the printer environment with Bindery
mode
Follow the steps below to make the printer environment under
NetWare 4.1x and IntranetWare with Bindery emulation.
Note:
❏ Assign Trusteeships for users if necessary.
❏ Be sure to use PCONSOLE to set the print queue and print server
instead of using NWADMIN.
1. Turn on the printer.
2. From any NetWare client, log in to the server as a
SUPERVISOR. Make sure to log in with Bindery connection.
Note:
If the client using this setting has been logged in with NDS mode,
press the F4 key while PCONSOLE is starting to switch to the
bindery mode.
3. Run PCONSOLE. From the Available Options screen, select
Print Queues and press Enter . Press Insert and type the print
queue name. Then press Enter .
Note:
Since your clients need the print queue name you set here when they
use the printer, announce the print queue name to your clients.
Settings for NetWare
3
3-21