Configuring For Netware Using Epsonnet Winassist - Epson aculaser c2000 Administrator's Manual
Color
Hide thumbs
Also See for aculaser c2000:
- Setup manual (83 pages) ,
- Quick reference (29 pages) ,
- Unpacking manual (21 pages)
Table of Contents
Advertisement
Configuring for NetWare using EpsonNet
WinAssist
Configure the Internal Print Server using EpsonNet WinAssist.
1. Turn on the printer.
2. From any NetWare client, log in to the target NetWare server
with supervisor privileges or ADMIN.
3. Load the print server from the file server's system console on
which the print queue volume is set.
>LOAD PSERVER print server name
4. Run EpsonNet WinAssist from the Start menu.
5. Click IPX. Select the printer you want to configure from the
list, then click Configuration .
Note:
❏ If you have connected more than one printer with the same type
of print server to the network, you can distinguish between the
printers by the MAC address.
❏ If the IP address is set to the default IP address, the printer model
may not appear.
Settings for NetWare
3
3-29
Advertisement
Table of Contents
