Setting Up Your Printer - Epson aculaser c2000 Administrator's Manual

Device Name:
Type the device name (up to 12 characters). LPT1, LPT2, LPT3,
and COM cannot be used.
4. Click the SUBMIT button and type the password to update the
settings. The same password is required for EpsonNet
WinAssist, MacAssist, and WebAssist. See "Password" on
page 9-44 for information on setting the password.
5. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Then, follow the on-screen instruction to reset the
printer.

Setting up your printer

This section explains how to set up a printer.
Windows 2000
1. Click Start, point to Settings, and then click Printers.
2. Double-click Add Printer to start the Add Printer wizard, and
then click Next.
3. Select the Network printer radio button and click Next.
4. Select the Type the printer name, or click Next to browse
for a printer radio button.
Enter the following in the Name box or click Next to browse
for a printer.
\\(NetBIOS name of the Internal Print Server) \
(Device name of the Internal Print Server)
5. Follow the on-screen instructions to set up the printer.
Settings for Windows 2000/NT
5
5-21