Default Serial Port Communication Values; Using The Control Panel; Printer Status Lights - Paxar 9830-CL Operator's Handbook Manual

D e f a u l t S e r i a l P o r t C o m m u n i c a t i o n V a l u e s
If you are communicating with the host through the serial port,
make sure the printer's communication values match those at the
host. The factory default values are: 9600 Baud, 8 bit data frame
Word Length, 1 Stop Bit, no Parity, and RTS/CTS Flow Control.
To change the printer's communication values, ask your System
Administrator or see "Setting DIP Switches" to change the DIP
switch settings.
U s i n g t h e C o n t r o l P a n e l
The control panel helps you check printer status, displays error
codes, and allows you to perform some basic printer functions.
P r i n t e r S t a t u s L i g h t s
Power:
Supplies:
1-4 Getting Started
Printhead
Release
Power
Status Code
Supplies
1 2 3
Paused
Pause
Feed
The printer shows a steady green light when
it is on.
The printer shows a blinking amber light when
it is out of labels or ribbon, or when you have
a supply jam.
Clear