Paxar 9830-CL Operator's Handbook Manual page 21

4. Push the deflector tab down.
5. Slide the extra ribbon core on the take-up reel as far as it will
go with the writing on the end of the core facing out. Use
your empty ribbon core as the take-up core. The take-up core
only fits on the take-up reel one way. (An extra take-up core
is available. See "Accessories" in Appendix A for more
information.)
6. Remove the new ribbon from the package as shown. Do not
wrinkle or crush the new ribbon.
2-8 Loading Supplies
Since some supplies are more abrasive to
printheads than others, using a ribbon wider than
your supply helps protect the printhead.
Deflector Tab
CAUTION