Replacing The Fuse - Paxar 9830-CL Operator's Handbook Manual

R e p l a c i n g t h e F u s e
The printer is shipped with a 115 volt or 220 volt slo-blow fuse.
To replace the fuse:
1. Disconnect the printer from the power source.
2. Use a screwdriver to pry open the fuse box in the back of the
printer as shown.
3. Remove the old fuse and insert a new one.
4. Slide the fuse box back into the printer.
Fuse Box
Fuse
Care and Maintenance 4-11