Paxar 9830-CL Operator's Handbook Manual page 51

224
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
5-8 Troubleshooting
Bar code Intercharacter gap must be 0 to 99 in printer
dots.
Power up mode must be 0 (online) or 1 (offline).
Language selection must be 0 (English).
Batch separator code must be 0 (off) or 1 (on).
Slash zero selection must be 0 (standard zero) or 1
(slash zero).
Supply type must be 0 (black mark), 1 (die cut), or 2
(continuous).
Ribbon selection must be 0 (direct) or 1 (transfer).
Feed mode must be 0 (continuous) or 1 (On-Demand).
Supply position is outside the range.
Contrast adjustment must be -390 to 1000 dots.
Print adjustment must be -99 to 99 dots.
Margin adjustment must be -99 to 99 dots.
Speed adjustment is invalid.
Primary monetary symbol is invalid.
Secondary symbol selection must be 0 (none) or 1
(print secondary sign).
Monetary decimal places must be 0 to 3.
Character string length in Packet E must be 5 (MPCL
control characters) or 7 (ENQ/IMD command character).
Baud rate selection must be 0 (1200), 1 (2400), 2
(4800), 3 (9600), 4 (19.2), or 5 (38.4).
Word length selection must be 0 (7 bits) or 1 (8 bits).