Paxar 9830-CL Operator's Handbook Manual page 49

041
042
043
044
045
046
051
101
102
104
105
106
107
108
109
200
201
202
203
204
5-6 Troubleshooting
Line direction must be 0, 90, 180, or 270.
The line segment or box end row is defined outside of
printable area.
The line segment or box end column is defined outside
of printable area.
Dot pattern for line or box must be "".
Line length is defined beyond the maximum length.
Line type must be S (segment) or V (vector).
Imaging mode in the graphic header must be 0.
Format referenced by batch is not in memory.
Print quantity is outside the range 0 to 32000.
Batch mode must be N (new) or U (update).
Batch separator must be 0 (Off) or 1 (On).
Print multiple is outside the range 1 to 999.
Cut multiple is outside the range 0 to 999.
Multiple part supply is outside the range 1 to 5.
Cut type is invalid.
Option number must be 1, 4, 30, 31, 42, 50, 60, or 61.
Copy length is outside the range 0 to 2710.
Copy start position must be 1 to 2710.
Destination start position must be 1 to 2710.
Source field must be 0 to 999.